Supermicro X10SRG-F User Manual download pdf (Page 88)

4-16

X10SRG-F User’s Manual

EHCI Hand-Off

This item is for operating systems that do not support Enhanced Host Controller

Interface (EHCI) hand-off. When this item is enabled, EHCI ownership change will

be claimed by the EHCI driver. The settings are Enabled and Disabled.

Port 60/64 Emulation

Select Enabled for I/O port 60h/64h emulation support, which in turn, will provide

complete legacy USB keyboard support for the operating systems that do not sup-

port legacy USB devices. The options are Disabled and Enabled.

USB 3.0 Support

Select Enabled for USB 3.0 support. The options are Disabled, Enabled, Auto

Smart and Auto.

EHCI1

Select Enabled to enable EHCI (Enhanced Host Controller Interface) support on

USB 2.0 connector #1 (-at least one USB 2.0 connector should be enabled for EHCI

support.) The options are Disabled and Enabled.

EHCI2

Select Enabled to enable EHCI (Enhanced Host Controller Interface) support on

USB 2.0 connector #2 (-at least one USB 2.0 connector should be enabled for EHCI

support.) The options are Disabled and Enabled.

XHCI Pre-Boot Driver

Select Enabled to enable XHCI (Extensible Host Controller Interface) support on a

pre-bootdrivespeciedbytheuser.TheoptionsareEnabledandDisabled.



SATA Conguration

When this submenu is selected, the AMI BIOS automatically detects the presence

of the SATA devices that are supported by the Intel PCH chip and displays the

following items:

SATA Controller

This item enables or disables the onboard SATA controller supported by the Intel

PCH chip. The options are Enabled and Disabled.

1 2 ... 83 84 85 86 87 88 89 90 91 92 93 ... 136 137

No comments

Supermicro X10SRG-F User Manual Page 88