Supermicro X10SRG-F User Manual download pdf (Page 85)

Chapter 4: AMI BIOS

4-13

COD Enable (Available when the OS and the CPU support this feature)

Select Enabled for Cluster-On-Die support to enhance system performance in

cloud computing. The options are Enabled and Disabled.

Isoc Mode

Select Enabled for Isochronous support to meet QoS (Quality of Service) require-

ments. This feature is especially important for Virtualization Technology. The

options are Enable and Disable.

Memory Conguration

Enforce POR

Select Enable to enforce POR restrictions for DDR4 frequency and voltage

programming. The options are Enabled and Disabled.

Memory Frequency

Use this feature to set the maximum memory frequency for onboard memory

modules. The options are Auto, 1333, 1400, 1600, 1800, 1867, 2000, 2133,

2200, 2400, 2600, 2667, and Reserved (Do not select Reserved).

Data Scrambling

Select Enabled to enable data scrambling to enhance system performance and

data integrity. The options are Auto, Disabled and Enabled.

DRAM RAPL (Running Average Power Limit) Baseline

Use this feature to set the run-time power-limit baseline for DRAM modules. The

options are Disable, DRAM RAPL Mode 0, and DRAM RAPL Mode 1.

Set Throttling Mode

Throttling improves reliability and reduces power consumption in the proces-

sor via automatic voltage control during processor idle states. The options are

Disabled and CLTT (Closed Loop Thermal Throttling).

Socket Interleave Below 4GB

Select Enabled for the memory above the 4G Address space to be split between

two sockets. The options are Enable and Disable.

A7 Mode

Select Enabled to support A7 (Addressing) Mode to improve memory perfor-

mance. The options are Enable and Disable.

1 2 ... 80 81 82 83 84 85 86 87 88 89 90 ... 136 137

No comments

Supermicro X10SRG-F User Manual Page 85