Supermicro X10SLX-F User Manual download pdf (Page 25)

Chapter 2: Installation

2-5

2-3 Processor and Heatsink Installation

Warning: When handling the processor package, avoid placing direct pressure on the

label area of the fan.

Notes:

•Always connect the power cord last, and always remove it before adding, re-

moving or changing any hardware components. Make sure that you install the

processor into the CPU socket before you install the CPU heatsink.

•If you buy a CPU separately, make sure that you use an Intel-certied multi-

directional heatsink only.

•Make sure to install the system board into the chassis before you install the

CPU heatsink.

•When receiving a server board without a processor pre-installed, make sure that

the plastic CPU socket cap is in place and none of the socket pins are bent;

otherwise, contact your retailer immediately.

•Refer to the Supermicro website for updates on CPU support.

Load Plate Handle

Installing the LGA1150 Processor

1. Gently press down the load plate handle and push it outward (to the right

side) to unlock it.

2. Once the load plate handle is unlocked, gently lift the handle to open the

load plate.

Load Plate

Handle Lock

Load Plate Handle

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 108 109

No comments

Supermicro X10SLX-F User Manual Page 25