Supermicro X10SLX-F User Manual Page 82
- Page / 109
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
4-18
X10SLX-F User’s Manual
PCIe/PCI/PnP Conguration
This feature allows the user to set the PCI/PnP congurations for the following items:
Above 4G Decoding (Available if the system supports 64-bit PCI decoding)
Select Enabled to decode a 64-bit PCI device in the space above 4G Address. The
options are Enabled and Disabled.
PCI Latency Timer
Use this feature to congure the PCI Latency timer register setting for each PCI
device installed on a PCI bus. Select 64 PCI Bus Clocks to set the PCI latency to
64 PCI clocks. The options are 32 PCI Bus Clocks, 64 PCI Bus Clocks, 96 PCI
Bus Clocks, 128 PCI Bus Clocks, 160 PCI Bus Clocks, 192 PCI Bus Clocks, 224
PCI Bus Clocks and 248 PCI Bus Clocks.
VGA Palette Snoop
Select Enabled to support VGA palette register snooping which will allow the
PCI cards that do not contain their own VGA color palette to examine the video
cards palette and mimic it for proper color display. The options are Disabled and
Enabled.
SLOT1 PCI-X 133/100MHz OPROM/SLOT2 PCI-X 133/100MHz OPROM/SLOT3
PCI-X 133/100MHz OPROM/SLOT4 PCI-X 133/100MHz OPROM/PCH SLOT5
PCI-E 2.0 x1 OPROM/PCH SLOT6 PCI-E 2.0 x4 (in x8) OPROM/CPU SLOT7
PCI-E 3.0 x8 OPROM
Use this feature to congure the Option ROM setting for a slot specied by the
user in order to boot the computer using a device installed on the slot specied.
The options are Disabled, Legacy and EFI.
Launch Storage OPROM Policy
This feature controls how the system executes UEFI (Unied Extensible Firmware
Interface), and legacy storage OPROM. Select Legacy Only to boot the system
using a legacy device installed in a PCI slot. The options are UEFI Only and
Legacy Only.
Other PCI Device ROM Priority
This feature selects a PCI device OPROM to launch for system boot if this device
is not a network, mass storage, or video device. The options are UEFI Only and
Legacy Only.
Onboard LAN1/LAN2 Option ROM
Select iSCSI to use the iSCSI Option ROM to boot the computer using an iSCSI
device installed in a LAN port specied. Select PXE (Preboot Execution Environ-
ment) to boot the computer using a PXE device installed in a LAN port specied.
- X10SLX-F 1
- About This Motherboard 3
- Manual Organization 3
- Contacting Supermicro 5
- Table of Contents 6
- Chapter 3 Troubleshooting 7
- •Two (2) SATA cables 9
- •One (1) I/O shield 9
- X10SLX-F User’s Manual 10
- Motherboard Features 14
- 1-2 Chipset Overview 17
- 1-4 PC Health Monitoring 18
- 1-3 Special Features 18
- 1-5 ACPI Features 19
- 1-6 Power Supply 19
- 1-7 Super I/O 20
- Chapter 2 21
- Installation 21
- Product Disposal 23
- Precautions 24
- Unpacking 24
- Removing the Heatsink 29
- Rev.1.00 30
- Removing Memory Modules 31
- Memory Support 31
- Memory Population Guidelines 31
- Tools Needed 33
- Location of Mounting Holes 33
- Installing the Motherboard 34
- 2-6 Connectors/IO Ports 35
- Front Control Panel 39
- A. Reset Button 43
- B. PWR Button 43
- 2-7 Connecting Cables 44
- Standby Power 47
- GLAN Enable 51
- Jumper Settings 51
- Pin# Denition 51
- 1-2 Enabled (default) 51
- 2-3 Disabled 51
- A. JPME1 53
- B. JPME2 53
- VGA Enable 55
- 1-2 Enabled (Default) 55
- LAN 1/LAN 2 56
- IPMI LAN 56
- (X8ST3-F) 56
- A. PWR LED 57
- B. BMC Heartbeat LED 57
- 2-10 SATA Connections 58
- Chapter 3 59
- Troubleshooting 59
- No Video 60
- Memory Errors 60
- •System conguration 61
- Battery Removal 63
- Proper Battery Disposal 63
- Battery Installation 63
- Chapter 4 65
- 4-2 Main Setup 66
- Boot Feature 68
- Power Conguration 69
- CPU Conguration 70
- Chipset Conguration 75
- •System Agent Bridge Name 76
- •VT-d Capability 76
- Memory Conguration 77
- •CAS Latency (tCL) 78
- •Minimum Delay Time 78
- •CAS to RAS (tRCDmin) 78
- •Row Precharge (tRPmin) 78
- •Intel PCH Rev ID 79
- •USB Conguration 79
- •USB Devices 79
- •Software Preserve Support 80
- PCIe/PCI/PnP Conguration 82
- ACPI Settings 83
- Super IO Conguration 85
- 4-4 Event Logs 89
- View SMBIOS Event Log 90
- •IPMI Firmware Revision 91
- •IPMI Status 91
- BMC Network Conguration 92
- 4-6 Boot Settings 93
- •1st Device 94
- •1st Boot Device 94
- 4-7 Security Settings 95
- 4-8 Save & Exit 96
- Appendix A 99
- BIOS Error Beep Codes 99
- Appendix B 101
- Appendix C 103
- Appendix D 107
- Dual Boot Block 107
Related products and manuals for Server/workstation motherboards Supermicro X10SLX-F
(129 pages)© 2020, manymanuals.com. All rights reserved. | 0.182 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals