Supermicro H8DMT+ User Manual download pdf (Page 53)

Chapter 4: BIOS

4-11

Selects the serial port to use for console redirection. Options are COM1 and

COM2.

Serial Port Mode

Selects the serial port settings to use. Options are (115200 8, n, 1), (57600 8, n,

1), (38400 8, n, 1), (19200 8, n, 1) and (09600 8, n, 1).

Flow Control

Selects the ﬂ ow control to be used for console redirection. Options are None,

Hardware and Software.

Redirection After BIOS POST

Options are Disable (no redirection after BIOS POST), Boot Loader (redirection

during POST and during boot loader) and Always (redirection always active). Note

that some OS's may not work with this set to Always.

Terminal Type

Selects the type of the target terminal. Options are ANSI, VT100 and VT-UTF8.

VT-UTF8 Combo Key Support

Allows you to Enable or Disable VT-UTF8 combination key support for ANSI/VT100

terminals.

Sredir Memory Display Delay

Use this setting to set the delay in seconds to display memory information. Options

are No Delay, 1 sec, 2 secs and 4 secs.

 Hardware Monitor

CPU Overheat Alarm

Use the "+" and "-" keys to set the CPU temperature threshold to between 65

and

C. When this threshold is exceeded, the overheat LED on the chassis will light up

and an alarm will sound. The LED and alarm will turn off once the CPU temperature

has dropped to 5 degrees below the threshold set. The default setting is 72

 System Fan Monitor

Fan Speed Control

This feature allows the user to determine how the system will control the speed of

the onboard fans. Select "Workstation" if your system is used as a Workstation.

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 67 68

No comments

Supermicro H8DMT+ User Manual Page 53