Supermicro SYS-8016B-6F User Manual download pdf (Page 53)

Chapter 5: Advanced Serverboard Setup

5-21

SAS2 Enable (X8QB6-F only)

Close pins 1-2 to enable SAS (Serial At-

tached SCSI) support on the 8016B-6F

(X8QB6-F serverboard). See the table

on the right for jumper settings. The

default setting is enabled.

SAS2 Enable

Jumper Settings

Jumper Setting Deﬁ nition

1-2 Enabled (Default)

2-3 Disabled

5-11 Onboard Indicators

GLAN1/2 LEDs

The Ethernet ports located on the I/O

backpanel have two LEDs. On each

port, one LED indicates activity while

the other LED may be green, amber

or off to indicate the speed of the

connection. See the table on the right

for the functions associated with the

connection speed LED.

GLAN1/2 LED

(Connection Speed Indicator)

LED Color Deﬁ nition

Off NC or 10 Mb/s

Green 100 Mb/s

Amber 1 Gb/s

Dedicated IPMI LAN LEDs

In addition to the two LAN ports de-

scribed above, a dedicated IPMI LAN

is also located on the I/O panel. The

amber LED on the right indicates

activity, while the green LED on the

left indicates the speed of the con-

nection. See the table at right for

more information.

IPMI LAN LEDs

LED Color/State Deﬁ nition

Left Green: Solid 100 Mb/s

Right Amber: Blinking Activity

Rear UID LED

The rear UID LED is located on

the backplane. This LED is used in

conjunction with the rear UID switch

to provide easy identiﬁ cation of a

system that might be in need of ser-

vice. Refer to UID Switch for more

information.

UID LED

Color/State OS Status

Blue: On Windows OS Unit Identiﬁ ed

Blue:

Blinking

Linux OS Unit Identiﬁ ed

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 105 106

Comments to this Manuals

No comments