USB Wake-Up
Use JPUSB jumpers to enable the function of
"System Wake-Up via USB devices", which
allows you to "wake-up" the system by press-
ing a key on the USB keyboard or by clicking
the USB mouse of your system. The JPUSB
jumpers are used together with the USB
Wake-Up function in the BIOS. Enable both
the jumpers and the BIOS setting to allow
the system to "wake-up via USB Devices".
See the table on the right for jumper settings
and jumper connections. (*Note: JPUSB1 is
for Back Panel USB ports:1/2/3/4/5/6, and
JPUSB2 is for Front Panel USB ports:7/8.)
(*Note: The default jumper setting for the
USB ports is "Disabled". However, when
the "USB Wake-Up" function is enabled in
the BIOS and the desired USB ports are
enabled via the JPUSB jumper, please be
sure to remove all USB devices from the
USB ports whose USB jumpers are set to
"Disabled" before the system goes into the
standby mode.)
Comments to this Manuals