2-6 Connecting Cables
(
*Note: the graphics shown in the chapter is based on the PDSG4. For the
PDSGE Model, please refer to Page 1-6.)
ATX Power Connector
The main power supply connector
(JPW1) on the PDSG4/PDSGE meets
the SSI (Superset ATX) specifi cation.
You can only use a 24-pin power sup-
ply cable on the motherboard. Make
sure that the orientation of the con-
nector is correct.
Processor Power Connector
In addition to the Primary ATX power
connector (above), the 12V 8-pin Pro-
cessor connector at JPW2 must also
be connected to your power supply
for CPU power consumption to avoid
causing instability to the system.
24-Pin ATX PWR
8-Pin 12V PWR
Comments to this Manuals