Supermicro P4SGA+ User Manual download pdf (Page 68)

SUPER P4SGA/P4SGL/P4SGR/P4SGE User's Manual

4-14

"Disabled".

Onboard Serial Port 1/Port 2

This setting allows the user to set the address and the corresponding IRQ

for the Serial Port1 and Serial Port 2. The options are "Disabled" , "3F8/

IRQ4", "2F8/IRQ3", "3E8/IRQ4", "2E8/IRQ3", and "Auto". The default setting

for Serial Port1 is "3F8/IRQ4" and the default for Port 2 is is "2F8/IRQ3".

UART Mode Select

This setting allows the user to select the UART mode for BIOS. The options

are "IrDA", "ASKIR" and "Normal".

RxD, TxD Active

This allows the user to change the settings for the "RxD, TxD Active"

function. The options are "Hi, Hi", "Hi, Lo", "Lo, Hi", and "Lo, Lo".

IR Transmission Delay

If "Enabled", the transmssion of IR (infrared) signals will be delayed. The

options are "Enabled" and "Disabled".

UR2 Duplex Mode

This setting set the mode for the UR2 Duplex Mode. The options are "Full"

and "Half".

Use IR Pins

This item sets the usage of the IR pins. The options are "RxD2, TxD2" and

"IR-Rx2Tx2".

Onboard Parallel Port

This setting allows the user to set the address and the corresponding IRQ

for the onboard parallel port. The options are "Disabled", "378/IRQ7", "278/

IRQ5" and "3BC/IRQ7".

1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 92 93

No comments

Supermicro P4SGA+ User Manual Page 68