Supermicro P4SGA+ User Manual download pdf (Page 27)

Chapter 2: Installation

2-3

5. Lift the lever on the CPU socket.

Socket Lever

6. Install the CPU in the socket. Make sure that

Pin 1 of the CPU is seated on Pin 1 of the socket

(both corners are marked with a triangle).

7. Press the lever down until

you hear it *click* into the

locked position.

Socket lever in

locked position

8. Apply the proper amount of thermal compound to the CPU die.

9. Place the heatsink on top of

the CPU and press firmly down-

ward - do not twist or slide

the heatsink to seat thermal

compound.

10. Secure the heat sink by

locking the retention clips into

their proper position.

11. Connect the CPU fan cable to

the CPU Fan header on the

motherboard.

Retainer clip

attachment

point

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 92 93

Comments to this Manuals

No comments