Supermicro X9SCM-iiF User Manual download pdf (Page 106)

X9SCM-IIF/X9SCL-IIF Series User's Manual

Note: At this point, you may decide if you want to start with BIOS Recov-

ery. If you decide to proceed with BIOS Recovery, follow the procedures

below.

a USB CD/DVD ROM/RW device can be used for this purpose. However, a USB

Hard Disk drive cannot be used for BIOS recovery at this time.

To perform UEFI BIOS recovery using a USB-attached device, follow the instruc-

tions below.

1. Using a different machine, copy the "Super.ROM" binary image le into the

disc Root "\" Directory of a USB device or a writeable CD/DVD.

Note: If you cannot locate the "Super.ROM" le in your driver disk, visit

our website at www.supermicro.com to download the BIOS image into a

USB ash device and rename it to "Super.ROM" for BIOS recovery use.

2. Insert the USB device that contains the new BIOS image ("Super.Rom") into

your USB drive and power on the system

3. While powering on the system, keep pressing <Ctrl> and <Home> simultane-

ously on your PS2 or USB keyboard until your hear two short beeps. This

may take from a few seconds to one minute.

4. After locating the new BIOS binary image, the system will enter the BIOS

Recovery page as shown below.

1 2 ... 101 102 103 104 105 106 107 108 109

No comments

Supermicro X9SCM-iiF User Manual Page 106