Supermicro X10SRA User Manual download pdf (Page 28)

1-10

Supermicro X10SRA/X10SRA-F Motherboard User’s Manual

Connector Description

I/O Back Panel See Back Panel I/O Connectors, below right

Audio FP Front Panel Audio Header

BT1 Onboard Battery

Fan 1,2,3,4,5 System/CPU Fan Headers (Fan1: CPU Fan)

JD1 Speaker/buzzer (Pins 1~4: External Speaker, Pins 3~4: Buzzer)

JF1 Front Panel Control Header

JL1 Chassis Intrusion Header

JPW1 24-pin ATX Main Power Connector (Required)

JPW2 +12V 4-pin CPU power Connector (Required)

JSD1 SATA DOM (Disk On Module) Power Connector

JSTBY1 Standby Power Header

SP1 Internal Speaker/Buzzer

I-SATA0~5 Serial ATA (SATA 3.0, 6Gb/sec), Supports RAID 0, 1, 5 & 10

S-SATA0~3 Serial ATA (SATA 3.0, 6Gb/sec), No RAID support

USB 16/17 Front Panel Accessible USB 3.0 Headers 16/17

S4 Power Button

S11 Restores the BIOS from Firmware ('SUPER.ROM') on a USB memory device

S8 Clear CMOS Button (on board)

JPI2C1 Power Supply SMBbus I2C Header.

JTPM1 Trusted Platform Module Header

COM1 Serial Port Header for COM1

JIPMB1 System Management Bus header (for IPMI only)

LED Description Color/State Status

LEDM1 BMC Heartbeat Green: Blinking BMC Normal

LED4 Status Display Digital Readout Download the status codes below**

LE2 Power LED On: Steady System On and Running

**Download the AMI status codes at http://www.ami.com/support/doc/ami_aptio_4.x_status_codes_pub.pdf

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 140 141

No comments

Supermicro X10SRA User Manual Page 28