Supermicro X10SRA User Manual download pdf (Page 118)

4-48

Supermicro X10SRA/X10SRA-F Motherboard User’s Manual

Data Bits

Use this feature to set the data transmission size for Console Redirec-

tion. The options are 7 (Bits) and 8 (Bits).

Parity

A parity bit can be sent along with regular data bits to detect data

transmission errors. Select Even if the parity bit is set to 0, and the

number of 1's in data bits is even. Select Odd if the parity bit is set

to 0, and the number of 1's in data bits is odd. Select None if you

do not want to send a parity bit with your data bits in transmission.

Select Mark to add a mark as a parity bit to be sent along with the

data bits. Select Space to add a Space as a parity bit to be sent with

your data bits. The options are None, Even, Odd, Mark and Space.

Stop Bits

A stop bit indicates the end of a serial data packet. Select 1 Stop Bit

for standard serial data communication. Select 2 Stop Bits if slower

devices are used. The options are 1 and 2.

Flow Control

Use this feature to set the ow control for Console Redirection to pre-

vent data loss caused by buffer overow. Send a "Stop" signal to stop

sending data when the receiving buffer is full. Send a "Start" signal

to start data-sending when the receiving buffer is empty. The options

are None and Hardware RTS/CTS.

VT-UTF8 Combo Key Support

Select Enabled to enable VT-UTF8 Combination Key support for ANSI/

VT100 terminals. The options are Enabled (checked) and Disabled

(unchecked).

Recorder Mode

Select Enabled to capture the data displayed on a terminal and send

it as text messages to a remote server. The options are Disabled

(unchecked) and Enabled (checked).

Resolution 100x31

Select Enabled for extended-terminal resolution support. The options

are Disabled (unchecked) and Enabled (checked).

1 2 ... 113 114 115 116 117 118 119 120 121 122 123 ... 140 141

No comments

Supermicro X10SRA User Manual Page 118