Supermicro X10SAT User Manual download pdf (Page 87)

Chapter 4: AMI BIOS

4-21

Ipv6 PXE Support (Available when Network Stack is set to Enabled)

Select Enabled to enable Ipv6 PXE (Preboot Execution Environment) for boot

support. If this feature is set to Disabled, Ipv6 PXE boot option will not be

supported. The options are Enabled and Disabled.



ACPI Settings

High Precision Timer

Select Enabled to activate the High Performance Event Timer (HPET) that produces

periodic interrupts at a much higher frequency than a Real-time Clock (RTC) does in

synchronizing multimedia streams, providing smooth playback and reducing the de-

pendency on other timestamp calculation devices, such as an x86 RDTSC Instruc-

tion embedded in the CPU. The High Performance Event Timer is used to replace

the 8254 Programmable Interval Timer. The options are Enabled and Disabled.

ACPI Sleep State

This feature selects the ACPI Sleep State that the system will enter into when the

suspend button is activated. The options are Suspend Disabled, S1 only (CPU

Stop Clock), S3 only (Suspend to RAM), Both S1 and S3 available for OS to

Choose from.

WHEA Support

This feature Enables the Windows Hardware Error Architecture (WHEA) support

for the Windows 2008 operating system (and later versions). The options are

Enabled and Disabled.



Trusted Computing (Available when a TPM Device is

Detected)

Conguration

Security Device Support

Select Enable for the AMI BIOS to automatically download the drivers needed

to provide Trusted Computing platform support for this machine to ensure date

integrity and network security. The options are Disable and Enable.

TPM State

Select Enabled to use TPM (Trusted Platform Module) settings for system data

security. The options are Disabled and Enabled.

Note: The system will reboot for the change on TPM State to take effect.

1 2 ... 82 83 84 85 86 87 88 89 90 91 92 ... 112 113

No comments

Supermicro X10SAT User Manual Page 87