Supermicro BMB-CMM-002 User Manual download pdf (Page 44)

Web-based Management Utility

7-4

7-2 Dynamic DNS

Selecting the DYNAMIC DNS option from the DEVICE SETTINGS submenu brings up the

YNAMIC DNS SETTINGS page (Figure 7-2). Use this page to configure Dynamic DNS

settings. Controls for this page are shown and detailed in Table 7-2.

Figure 7-2. Dynamic DNS Settings Page

Table 7-2. Dynamic DNS Settings Page Controls

Item Name Description

Enable

Dynamic DNS

Check this box to enable Dynamic DNS.

Dynamic DNS

Server Link

Click the www.dyndns.org: link to access the DynDNS web site. This is the

server name where the DDNS Service is registered.

3 DNS System

If Dynamic DNS is enabled, you can select either C

USTOM or DYNAMIC from

the pull-down menu. Select C

USTOM to use your own system as the DNS

server. Select D

YNAMIC to use the pre-configured Dynamic DNS as your

server.

4 Hostname Enter the name you want to use for the remote host server.

5 Username Enter the username for the remote host user.

6 Password Enter the password for the remote host user.

Check time

(HH:MM)

Enter the time the SIMCM card first registers with the DNS server in the

HH:MM format (such as: 07:25 or 19:30).

8 Check Interval Enter the time interval for the IPMI to report to the Dynamic DNS again.

10 11

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 63 64

No comments

Supermicro BMB-CMM-002 User Manual Page 44