Supermicro BMB-CMM-002 User Manual download pdf (Page 43)

7-3

Chapter 7: Device Settings

Secondary DNS

Server IP

Address

Enter the IP address of the Secondary Domain Name Server in the box. It

will be used when the Primary DNS Server cannot be contacted.

Remote

Console &

HTTPS Port

Enter the port numbers the remote host and the HTTP server are listening.

If a number is not entered in the box, the default value will be used.

9 HTTP Port

Enter the port number the of the HTTP server. If a number is not entered in

the box, the default value will be used.

10 SSH Port

Enter the port number of the SSH server. If a number is not entered in the

box, the default value will be used.

11 Bandwidth Limit

Enter the maximum bandwidth value for network interfacing. The value

should be in Kbits per second.

Enable SSH

Access

Click this box to enable SSH access.

Disable Setup

Protocol

Check this box to disable the setup protocol function of the SIMBL card.

LAN Interface

Speed

Click on the arrow on the right to select a desired LAN interface speed from

the pull-down menu. The options are Auto-detect, 10 Mbps or 100 Mbps. If

Auto-detect is selected, the optimized speed will be set based on the

system configurations detected by the OS.

LAN Interface

Duplex Mode

Click on the arrow on the right to select a desired LAN interface duplex

mode from the pull-down menu. The options are A

UTO-DETECT, HALF

UPLEX and FULL DUPLEX. If Auto-detect is selected, the LAN INTERFACE

UPLEX MODE will be set to the optimized setting based on the system

configurations detected by the OS.

16 Apply Click this icon to apply the selections you made.

Reset to

Defaults

Click this icon if you want to reset the defaults for the Remote Console

button keys.

Table 7-1. Network Page Controls (Continued)

Item Name Description

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 63 64

Comments to this Manuals

No comments

Supermicro BMB-CMM-002 User Manual Page 43

Comments to this Manuals