Supermicro SBA-7142G-T4 User Manual download pdf (Page 59)

5-7

Chapter 5: BIOS

PCI/PnP Configuration

The menu options in the PCI/PNP CONFIGURATION submenu and their descriptions are

shown in Table 5-5.

S.M.A.R.T

Self-Monitoring Analysis and Reporting Technology (SMART) can help predict

impending drive failures. Select "Auto" to allow BIOS to auto detect hard disk

drive support. Select "Disabled" to prevent AMI BIOS from using the S.M.A.R.T.

Select "Enabled" to allow AMI BIOS to use the S.M.A.R.T. to support hard drive

disk. The options are Disabled, Enabled, and Auto.

32Bit Data

Transfer

Select "Enabled" to activate the function of 32-Bit data transfer. Select "Disabled"

to deactivate the function. The options are Enabled and Disabled.

IDE Detect Time Out

Use the +/- keys to adjust and select the time out for detecting ATA/ATAPI

devices. The default value is 35.

Table 5-5. PCI/PnP Configuration Submenu

Menu Option Description

Clear NVRAM Select YES to clear NVRAM during boot-up. The options are YES and No.

Plug & Play OS

Select YES to allow the OS to configure Plug & Play devices.

NOTE: Selecting Y

ES is not required for system boot if your system has an OS

that supports Plug & Play.

Select No to allow AMIBIOS to configure all devices in the system.

PCI Latency Timer

This option sets the latency of all PCI devices on the PCI bus. Select a value to

set the PCI latency in PCI clock cycles. Options are 32, 64, 96, 128, 160, 192,

224 and 248.

PCI IDE BusMaster

When enabled, this allows BIOS to use PCI busmastering for reading/writing to

IDE drives. Options include Enabled and Disabled.

Onboard LAN Option

ROM Select

This setting allows you to select the onboard LAN option ROM for iSCSI or PXE.

Note: You must enable ONLY LAN1 when the iSCSI support option is specified.

Load Onboard LAN 1

Option ROM

This option allows you to enable or disable the onboard LAN 1 option ROM.

Load Onboard LAN 2

Option ROM

This option allows you to enable or disable the onboard LAN 2 option ROM.

Table 5-4. IDE Configuration Submenu (Continued)

Menu Option Description

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 79 80

Comments to this Manuals

No comments

Supermicro SBA-7142G-T4 User Manual Page 59

Comments to this Manuals