Supermicro X10SLL-SF User Manual download pdf (Page 106)

C-2

X10SLM-F/X10SLL-F/X10SLL-SF/X10SLL-S User’s Manual

5. When the screen as shown above displays, using the arrow key, select the

item- "Proceed with ash update" and press the <Enter> key. You will see the

progress of BIOS Recovery as shown in the screen below.

Note: Do not interrupt the process of BIOS ashing until it is com-

pleted.

To perform UEFI BIOS recovery using a USB-attached device, follow the instruc-

tions below.

1. Using a different machine, copy the "Super.ROM" binary image le into the

disc Root "\" Directory of a USB device or a writeable CD/DVD.

Note: If you cannot locate the "Super.ROM" le in your driver disk, visit

our website at www.supermicro.com to download the BIOS image into

a USB ash device and rename it "Super ROM" for BIOS recovery use.

2. Insert the USB device that contains the new BIOS image ("Super.ROM") into

your USB drive and power on the system

3. While powering on the system, keep pressing <Ctrl> and <Home> simultane-

ously on your keyboard until your hear two short beeps. This may take from a

few seconds to one minute.

4. After locating the new BIOS binary image, the system will enter the BIOS

Recovery menu as shown below.

Note: At this point, you may decide if you want to start with BIOS Recov-

ery. If you decide to proceed with BIOS Recovery, follow the procedures

below.

1 2 ... 101 102 103 104 105 106 107 108 109 110 111

No comments

Supermicro X10SLL-SF User Manual Page 106