Supermicro X10SLL-SF User Manual download pdf (Page 87)

Chapter 4: AMI BIOS

4-19

•SPS Version

•ME FW (Firmware) Status Value

•ME FW State

•ME FW Operation State

•ME FW Error Code

•ME NM FW Status Value

•BIOS Booting Mode

•Cores Disabled

•ME FW SKU Information

•End-of-POST Status



Super IO Conguration

Super IO Chip NCT6776F



Serial Port 1 Conguration

Serial Port

Select Enabled to enable the onboard serial port. The options are Enabled and

Disabled.

Change Port 1 Settings

This feature species the base I/O port address and the Interrupt Request ad-

dress of Serial Port 1. Select Auto to let the BIOS automatically assign the base

I/O and IRQ address. The options for Serial Port 1 are Auto, (IO=3F8h; IRQ=4),

(IO=3F8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12), (IO=2F8h; IRQ=3, 4, 5, 6, 7, 9, 10,

11, 12), (IO=3E8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12) and (IO=2E8h; IRQ=3, 4, 5,

6, 7, 9, 10, 11, 12).



Serial Port 2 Conguration

SOL Serial Port

Select Enabled to use Serial Port 2 as a SOL (Serial_Over_LAN) Serial Port for

remote console support. The options are Enabled and Disabled.

1 2 ... 82 83 84 85 86 87 88 89 90 91 92 ... 110 111

No comments

Supermicro X10SLL-SF User Manual Page 87