Supermicro X8DTL-I User Manual download pdf (Page 91)

Chapter 4: AMI BIOS

4-29

5. Following the instructions given on the screen to update the BIOS. These

instructions are also shown below.

a. At the prompt, press the <SpaceBar> to update the BIOS.

b. When asked to conﬁ rm BIOS updating, press <y> to conﬁ rm BIOS

updates.

c. Press <y> again to begin ﬂ ashing BIOS remotely.

Note: Be sure to complete Steps a~c above quickly because

you have a second or less to do so.

6. Once you've completed the instructions given, a screen will display to indicate

that remote ﬂ ashing is starting and the new BIOS ﬁ le is being uploaded.

7. To use Hyper Terminal to transfer the XModem protocol by using the "Send

File" dialog under the "Transfer" menu, follow the instructions below to com-

plete XModem transfers.

a. Select the "Transfer" menu and enter <Send>.

4. Power on your system and click the <Connect> button in the Hyper Terminal.

The terminal screen will display the following messages.

b. Specify the location of the ROM ﬁ le and select the proper protocol (XMo-

dem).

c. Press <Send> to start ROM File extraction. (See the picture below.)

Press <SpaceBar> to update BIOS.

Confirm update BIOS? (y/n) y

Begin remote BIOS flash? (y/n) y

Starting remote flash.

Upload new BIOS file using Xmodem protocol.

1 2 ... 86 87 88 89 90 91 92 93 94 95 96 ... 100 101

No comments

Supermicro X8DTL-I User Manual Page 91