Supermicro X7DBE-X Datasheet download pdf (Page 76)

4-18

X7DB8-X/X7DBE-X User's Manual

Hardware Monitoring

*Note: The Phoenix BIOS will automatically detect the type of CPU(s) and hardware

monitoring chip used on the motherboard and will display the Hardware Monitoring

Screen accordingly. Your Hardware Monitoring Screen may look like the one shown

on this page, on P. 4-19, or on P. 4-20, depending on the type of CPU(s) and HW

Monitoring chip you are using.

CPU Temperature Threshold

This option allows the user to set a CPU temperature threshold that will activate the

alarm system when the CPU temperature reaches this pre-set temperature threshold.

The options are 70

C, 75

C, 80

C and 85

C. (*See the note below.)

Highlight this and hit <Enter> to see monitor data for the following items:

CPU1 Temperature/CPU1 Second Core

CPU2 Temperature/CPU2 Second Core

System Temperature

Fan1-Fan8 Speeds: If the feature of Auto Fan Control is enabled, the BIOS will

automatically display the status of the fans indicated in this item.

Fan Speed Control Modes

This feature allows the user to decide how the system controls the speeds of the

onboard fans. The CPU temperature and the fan speed are correlative. When the

CPU on-die temperature increases, the fan speed will also increase, and vice versa.

If the option is set to “3-pin fan”, the fan speed is controlled by voltage. If the op-

tion is set to “4-pin”, the fan speed will be controlled by Pulse Width Modulation

(PWM). Select “3-pin” if your chassis came with 3-pin fan headers. Select “4-pin”

if your chassis came with 4-pin fan headers. Select “Workstation” if your system is

used as a Workstation. Select “Server” if your system is used as a Server. Select

“Disable” to disable the fan speed control function to allow the onboard fans to

constantly run at full speed (12V). The Options are: 1. Disable, 2. 3-pin (Server),

3. 3-pin (Workstation), 4. 4-pin (Server) and 5. 4-pin (Workstation).

Voltage Monitoring

The following items will be monitored and displayed:

P12V_VR0/P12V_VR1/FSB VTT/PXH Vcore/ES2B Vcore/CPU1Vcore/CPU2Vcore/

P3V3

*Note: In the Windows OS environment, the Supero Doctor III settings take pre-

cedence over the BIOS settings. When ﬁ rst installed, Supero Doctor III adopts the

temperature threshold settings previously set in the BIOS. Any subsequent changes

to these thresholds must be made within Supero Doctor, since the SD III settings

override the BIOS settings. For the Windows OS to adopt the BIOS temperature

threshold settings, please change the SDIII settings to be the same as those set

in the BIOS.

1 2 ... 71 72 73 74 75 76 77 78 79 80 81 ... 129 130

Comments to this Manuals

No comments

Supermicro X7DBE-X Datasheet Page 76

Comments to this Manuals

Related products and manuals for Motherboards Supermicro X7DBE-X