Supermicro X10SLV-Q User Manual download pdf (Page 81)

Chapter 4: AMI BIOS

4-15

PCH DMI Link ASPM Control

Use this feature to set the ASPM (Active State Power Management) state on

the device installed on the DMI Link supported by the PCH chip. The options

are Disabled and Enabled.



Memory Conguration

This item displays the following information on the memory modules installed

on the motherboard.

•Memory RC Version

•Memory Frequency

•Total Memory

•Memory Voltage

•DIMM A1

•DIMM B1

•CAS Latency (tCL)

•Minimum Delay Time

•CAS to RAS (tRCDmin)

•Row Precharge (tRPmin)

•Active to Precharege (tRASmin)

Memory Frequency Limiter

This feature limits the frequency on which the system memory operates. The

settings are Auto, 1067, 1333, and 1600.

Max TOLUD (Top of Low Usable DRAM)

This feature sets the maximum TOLUD value, which species the "Top of Low

Usable DRAM" memory space to be used by internal graphics devices, GTT

Stolen Memory, and TSEG, respectively, if these devices are enabled. The op-

tions are Dynamic, 1 GB, 1.25 GB, 1.5 GB, 1.75 GB, 2 GB, 2.25 GB, 2.5 GB,

2.75 GB, 3 GB and 3.25 GB.

Note: TSEG is a block of memory that is only accessible by the processor

while operating in System Management Mode (SMM).

1 2 ... 76 77 78 79 80 81 82 83 84 85 86 ... 106 107

No comments

Supermicro X10SLV-Q User Manual Page 81