Supermicro H8SGL-F User Manual download pdf (Page 62)

4-12

H8SGL(-F) Serverboard User’s Manual

 IPMI Conﬁ guration

This menu shows static information about the IPMI ﬁ rmware revision and status of

the BMC, as well as options for IPMI conﬁ guration.

 View BMC System Event Log

Pressing the Enter key will open the following settings. Use the "+" and "-" keys to

navigate through the system event log.

Clear BMC System Event Log

Selecting this and pressing the Enter key will clear the BMC system event log.

 Set LAN Conﬁ guration

Use the "+" and "-" keys to choose the desired channel number. This displays

Channel Number and Channel Number Status information.

This menu contains options for inputing settings for the SET LAN Conﬁ guration

Command. See IPMI 1.5 Speciﬁ cation, table 11.1 for details. Use the "+" and

"-" keys to choose the desired channel number.

Note: Each question in this group may take a considerable amount of time.

IP Address Source

Select the source of this machine's IP address. If Static is selected, you will

need to know and enter manually the IP address of this machine below. If

DHCP is selected, the BIOS will search for a DHCP (Dynamic Host Conﬁ gu-

ration Protocol) server in the network it is attached to, and request the next

available IP address. The options are DHCP and Static.

The following items are assigned IP addresses automatically if DHCP is

selected under IP Address Source above:

IP Address

This submenu sets the IP address source as either Static or DHCP. Selecting

Static allows you to manually set the IP Address, Subnet Mask and Gateway

Address.

In the ﬁ eld provided here enter the IP address in the decimal form of xxx.xxx.

xxx.xxx with xxx having a value of less than 256 and in decimal form only The

IP address and current IP address in the BMC are shown.

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 73 74

No comments

Supermicro H8SGL-F User Manual Page 62