Supermicro H8DMU+ User Manual download pdf (Page 54)

4-4

H8DMU+ User’s Manual

Restore on AC Power Loss

This setting allows you to choose how the system will react when power returns

after an unexpected loss of power. The options are Power Off, Power On and

Last State.

MPS Revision

This setting allows the user to select the MPS revision level. The options are

1.1 and 1.4.MPS Revision

This setting allows the user to select the MPS revision level. The options are

1.1 and 1.4.

 Floppy/IDE/SATA Conﬁ guration

Onboard Floppy Controller

Use this setting to Enable or Disable the onboard ﬂ oppy controller.

Floppy A

Move the cursor to these ﬁ elds via up and down <arrow> keys to select the

ﬂ oppy type. The options are Disabled, 360 KB 5 1/4", 1.2 MB 5 1/4", 720 KB

3½", 1.44 MB 3½”, and 2.88 MB 3½".

Onboard IDE Controller

There is a single ﬂ oppy controller on the motherboard, which may be Enabled

or Disabled with this setting.

Serial ATA Devices

This setting is used to determine if SATA drives will be used and how many.

Options are Disabled, Device 0, Device 0/1 and Device 0/1/2.

nVidia RAID Function

This setting is used to Enable or Disable the nVidia ROM. If Enabled, the

setting below will appear.

 Primary IDE Master/Slave

Highlight one of the items above and press <Enter> to access the submenu

for that item.

Type

Select the type of device connected to the system. The options are Not

Installed, Auto, CDROM and ARMD.

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 79 80

No comments

Supermicro H8DMU+ User Manual Page 54