Supermicro C2SBC-Q User Manual download pdf (Page 64)

4-10

C2SBC-Q User's Manual

to reduce power consumption and heat dissipation. The options are Enabled (-C

States, GV1/GV3 are enabled), GV1/GV3 Only (C States: Disabled), C-States Only

(-G1/G3: Disabled), and Disabled (-C States, GV1/GV3 are disabled).

Advanced Chipset Control

Access the submenu to make changes to the following settings.

Warning: Be cautious when changing the Advanced settings. An incorrect

setting, a very high DRAM frequency or an incorrect DRAM timing may re-

sult in system instability. When this occurs, revert to the default setting.

Integrated Device Control Sub-menu

Memory Reclaiming

Select Enable to enable the functionality of Memory Remapping above 4GB. The

settings are Enabled and Disabled.

Enable VT-d

Select Enable to enable the functionality of the Intel Virtualization Technology for

Direct I/O support, which offers fully-protected I/O resource-sharing across the

Intel platforms, providing the user with greater reliability, security and availability

in networking and data-sharing. The settings are Enabled and Disabled.

Default Primary Video Adapter

This feature allows the user to select the video device used by the BIOS during

POST. If set to Auto, PEG, PCI, and IGD (Internal Graphics Device) devices

will be selected. If set to IGD (Internal Graphics Device), IGD and PCI devices

will be selected. If set to PEG, PEG and PCI devices will be selected. If set to

PCI, PCI, PEG and IGD devices will be selected.

IGD-Device 2

This feature allows the user to enable or disable Internal Graphics Device#2 by

entering a specied value. Select Auto to allow this device to be automatically

enabled when detected by the BIOS.

IGD-Device 2, Function 1

This feature allows the user to auto or disable Function#1 of Internal Graphics

Device#2 by entering a specied value. Select Auto to allow this device to be

automatically enabled when detected by the BIOS.

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 86 87

No comments

Supermicro C2SBC-Q User Manual Page 64