Supermicro SC113TQ-600CB User Manual download pdf (Page 53)

5-11

Chapter 5 Chassis Setup and Maintenance

Installing an Expansion Card

1. Conrm that you have the correct riser card for your chassis model and the

add-on card includes a standard bracket.

2. Remove the chassis cover.

3. Install the riser card onto the bracket. Insert the card and bracket into the

appropriate slot on the motherboard. Secure the riser bracket to the chassis

using screws as illustrated.

4. Choose the PCI slot in which to place the add-on card.

5. In that slot, open the PCI slot panel lever and slide the PCI slot panel side-

ways.

6. From inside the chassis, remove the PCI slot panel panel.

7. Slide the add-on card into the riser card and attach the add-on card bracket

in place of the PCI slot panel.

8. Secure the add-on card by closing the I/O panel lever.

9. Connect cables to the add-on card if necessary.

Figure 5-10: Chassis with a Riser Card

UIO Riser Card

WIO Riser Card

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 85 86

No comments

Supermicro SC113TQ-600CB User Manual Page 53