Supermicro X9DRT-IBQF User Manual download pdf (Page 93)

Chapter 4: AMI BIOS

4-17

PCI-E x16 OPROM

Select Enabled to enable Option ROM support to boot the computer using a de-

vice installed on the slot specied above. The options are Enabled and Disabled.

Onboard LAN Option ROM Select

Select iSCSI to use the iSCSI Option ROM to boot the computer using a network

device. Select PXE (Preboot Execution Environment) to use an PXE Option ROM

to boot the computer using a network device. The options are iSCSI and PXE.

Load Onboard LAN1 Option ROM, Load Onboard LAN2 Option ROM

Select Enabled to enable the onboard LAN1/LAN2 Option ROM. This is to boot

the computer using a network device. The default setting for LAN1 Option ROM is

Enabled, and the default setting for LAN2 Option ROM is Disabled.

VGA Priority

This feature allows the user to select the graphics adapter to be used as the primary

boot device. The options are Onboard, and Offboard.

Network Stack

Select Enabled enable PXE (Preboot Execution Environment) or UEFI (Unied

Extensible Firmware Interface) for network stack support. The options are Enabled

and Disabled.

SuperIOConguration

Super IO Chip: This item displays the Super IO chip used in the motherboard.

COMConguration

Serial Port

Select Enabled to enable a serial port specied by the user. The options are

Enabled and Disabled.

Device Settings

This item displays the settings of Serial Port 1 (COM).

1 2 ... 88 89 90 91 92 93 94 95 96 97 98 ... 116 117

No comments

Supermicro X9DRT-IBQF User Manual Page 93