Supermicro X10SLA-F User Manual download pdf (Page 33)

Chapter 2: Installation

2-13

X10SLA(-F)

Rev. 1.01

2-4 Installing DDR3 Memory

Note: Check the Supermicro website for recommended memory mod-

ules.

CAUTION

Exercise extreme care when installing or removing DIMM

modules to prevent any possible damage.

DIMM Installation

1. Insert the desired number of DIMMs

into the memory slots, starting with

DIMMA1 (Channel A, Slot 1, see

the next page for the location). For

the system to work properly, please

use the memory modules of the

same type and speed in the same

motherboard.

Release Tabs

Notches

2. Push the release tabs outwards on

both ends of the DIMM slot to unlock

it.

Press both notches

straight down into

the memory slot.

3. Align the key of the DIMM mod-

ule with the receptive point on the

memory slot.

4. Align the notches on both ends of

the module against the receptive

points on the ends of the slot.

5. Use two thumbs together to press

the notches on both ends of the

module straight down into the slot

until the module snaps into place.

6. Press the release tabs to the lock

positions to secure the DIMM module

into the slot.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 110 111

No comments

Supermicro X10SLA-F User Manual Page 33