Supermicro A1SRM-2758F User Manual Page 67

  • Download
  • Add to my manuals
  • Print
  • Page
    / 99
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 66
Chapter 4: AMI BIOS
4-7
SATA 2 Controller
SATA Controller
This feature enables or disables the SATA Controller specied by the user. The
options are Enabled and Disabled.
SATA Mode
This item selects the mode for the installed SATA drives. The options are IDE and
AHCI.
LPM (Line Power Management)
Select Enabled to enable Line Power Management support. The options are En-
abled and Disabled.
SATA Port 2 - SATA Port 5
This item displays the information detected on the device installed on the par-
ticular SATA port.
•Model Name
SATA Port 2/SATA Port 3/SATA Port 4//SATA Port 5
Select Enabled to enable a SATA port selected by the user. The options are
Enabled and Disabled.
Spin Up
On an edge detect from 0 to 1, set this item to allow the PCH to start a COM-
RESET initialization sequence to the device installed on a SATA port specied
by the user. The options are Enabled and Disabled.
External Device
Select Enabled for the SATA port specied by the user to support an external
device. The options are Enabled and Disabled.
Hot Plug
Select Enabled to enable hot-plugging support on a SATA drive specied by the
user, which will allow the user to replace the SATA disk drive without shutting
down the system. The options are Enabled and Disabled.
CPU Conguration
The following CPU information will be displayed:
•Processor ID
Page view 66
1 2 ... 62 63 64 65 66 67 68 69 70 71 72 ... 98 99

Comments to this Manuals

No comments