Supermicro AOC-SAS2LP-H8IR User Manual download pdf (Page 18)

AOC-USAS2LP-H8iR Add-on Card User’s Manual

2-8

Flashing Firmware Using the MegaCLI under DOS

Use the procedure below to flash firmware using the MegaCLI application under DOS.

Flashing Firmware Using the MegaCLI under DOS

1. Boot from USB key and use command Megacli -adpFwFlash -f

AF2108_FW_Image.rom -a0 (Figure 2-10).

2. Next update the controller NVData with Megacli -adpFwFlash -f smc2108.rom -a0

(Figure 2-11).

3. Reboot the system and check the firmware version in the controller banner during

boot-up and using the MegaRAID Storage Manager application in Windows (see

step 8 and step 9 in the Flashing Firmware Using MegaRAID Storage Manager

procedure).

2-5 MegaRAID Storage Manager

For information, installation and use of the LSI MegaRAID Storage Manager Windows

application and MegaCLI Command Line Interface application download the MegaRAID

SAS Software_Rev_I_UG.pdf file from: http://www.supermicro.com/support/manuals/

on the SuperMicro website.

Figure 2-10. Flashing Firmware Using the Megacli Command

Figure 2-11. Updating the Controller NVData

1 2 ... 13 14 15 16 17 18 19 20

No comments

Supermicro AOC-SAS2LP-H8IR User Manual Page 18