Supermicro AOC-STG-I2T User's Guide download pdf (Page 16)

3-2

AOC-STG-i2T Add-on Card User's Guide

3-2 Before Installation

To install the add-on card properly, be sure to follow the instructions below.

1. Power down the system.

2. Remove the power cord from the wall socket.

3. Use industry standard anti-static equipment (such as gloves or wrist strap)

and follow the instructions listed on Page 3-1 to avoid damage caused by

ESD.

4. Familiarize yourself with the server, motherboard, and/or chassis documenta-

tion.

5. Conrm that your operating system includes the latest updates and hotxes.

3-3 Installing the Add-on Card

Follow the steps below to install the add-on card into your system.

1. Remove the server cover and, if necessary, set aside any screws for later

use.

2. Remove the add-on card slot cover. If the case requires a screw, place the

screw aside for later use.

3. Position the add-on card in the slot directly over the connector, and gently

push down on both sides of the card until it slides into the PCI connector.

4. Secure the add-on card to the chassis. If required, use the screw that you

previously removed.

5. Attach any necessary external cables to the add-on card.

6. Replace the chassis cover.

7. Plug the power cord into the wall socket, and power up the system.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21

No comments

Supermicro AOC-STG-I2T User's Guide Page 16