Supermicro H8DSR-8 User Manual download pdf (Page 51)

Chapter 4: BIOS

4-5

 Floppy Conﬁ guration

Floppy A

Move the cursor to these ﬁ elds via up and down <arrow> keys to select the

ﬂ oppy type. The options are Disabled, 360 KB 5 1/4", 1.2 MB 5 1/4", 720 KB

3½", 1.44 MB 3½”, and 2.88 MB 3½".

Floppy B

Move the cursor to these ﬁ elds via up and down <arrow> keys to select the

ﬂ oppy type. The options are Disabled, 360 KB 5 1/4", 1.2 MB 5 1/4", 720 KB

3½", 1.44 MB 3½”, and 2.88 MB 3½".

 PCI/PnP Menu

Clear NVRAM

Select Yes to clear NVRAM during boot-up. The options are Yes and No.

Plug & Play OS

Select Yes to allow the OS to conﬁ gure Plug & Play devices. (This is not required

for system boot if your system has an OS that supports Plug & Play.) Select No

to allow AMIBIOS to conﬁ gure all devices in the system.

PCI Latency Timer

This option sets the latency of all PCI devices on the PCI bus. Select a value to

set the PCI latency in PCI clock cycles. Options are 32, 64, 96, 128, 160, 192,

224 and 248.

Allocate IRQ to PCI VGA

Set this value to allow or restrict the system from giving the VGA adapter card an

interrupt address. The options are Yes and No.

Palette Snooping

Select "Enabled" to inform the PCI devices that an ISA graphics device is installed

in the system in order for the graphics card to function properly. The options are

Enabled and Disabled.

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 73 74

No comments

Supermicro H8DSR-8 User Manual Page 51