Supermicro C2SBM-Q User Manual download pdf (Page 20)

2-2

C2SBM-Q User's Manual

Installation of the LGA 775 Processor

1. Press the load lever to release

the load plate, which covers the CPU

socket, from its locking position.

Load lever

2. Gently lift the load lever to open the

load plate.

PnP cap on

top of the load

plate

Load plate

(with PnP cap

attached)

Warning: When handling the processor package, avoid placing direct pressure

on the label area of the fan.

Notes:

1. Always connect the power cord last and always remove it before adding, removing

or changing any hardware components. Make sure that you install the processor

into the CPU LGA 775 socket before you install the CPU heatsink.

2. The Intel LGA 775 Processor package contains the CPU fan and heatsink as-

sembly. If you buy a CPU separately, make sure that you use only Intel-certied

multi-directional heatsink and fan.

3. Make sure to install the motherboard into the chassis before you install the CPU

heatsink and fan.

4. When purchasing an LGA 775 Processor or when receiving a motherboard with

an LGA 775 Processor pre-installed, make sure that the CPU plastic cap is in place

and none of the CPU pins are bent; otherwise, contact the retailer immediately.

5. Refer to the MB Features Section for more details on CPU support.

2-3 Processor and Heatsink Installation

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 94 95

No comments

Supermicro C2SBM-Q User Manual Page 20