Supermicro CSE-847E16-RJBOD1 User Manual download pdf (Page 13)

2-1

Chapter 2: System Safety

Chapter 2

System Safety

2-1 Overview

This chapter provides a quick setup checklist to get your chassis up and running.

Following the steps in order given should enable you to have your chassis set up

and operational within a minimal amount of time. This quick setup assumes that you

are an experienced technician, famailiar with common concepts and terminology.

2-2 Warnings and Precautions

You should inspect the box the chassis was shipped in and note if it was damaged

in any way. If the chassis itself shows damage, le a damage claim with carrier

who delivered your system.

Decide on a suitable location for the rack unit that will hold that chassis. It should

be situated in a clean, dust-free area that is well venilated. Avoid areas where heat,

electrical noise and eletromagnetic elds are generated.

You will also need the system placed near at least one grounded power outlet. When

congured, the SC847 chassis includes one power supply. "R" models include a

redundant power supply and require two grounded outlets.

2-3 Preparing for Setup

The SC847 chassis includes a set of rail assemblies which includes mounting brack-

ets and mounting screws you will need to install the systems into the rack. Please

read this manual in its entirety before you begin the installation procedure.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 127 128

No comments

Supermicro CSE-847E16-RJBOD1 User Manual Page 13